Processing Capacity : 1-200 t/h
Motor Power: 7.5-75 kw
Applied Material: slag, cement, gypsum powder, clay ,coal, lime, etc
Dryer is the necessary machine in ore processing and grinding processing, and the rotary dryer is the most common machine in mining enterprises.
Processing Capacity : 1-200 t/h
Motor Power: 7.5-75 kw
Applied Material: slag, cement, gypsum powder, clay ,coal, lime, etc
Fote Company support is available worldwide to assist you throughout the life of your FTM Equipment. For answers to your questions or to coordinate a service visit to your plant, please contact Telsmith Our by Chat Online or Email:market@sinoftm.com
Dryer is the necessary machine in ore processing and grinding processing, and the rotary dryer is the most common machine in mining enterprises. It can be used in industrial production, and generally speaking, it used in drying the concentrate, sand, cement and so on which have water.
First, the material is fed into the rotary cylinder of the rotary dryer, the material is baked in the process of rewinding and feeding the inner and outer cylinder. And then the dried material is sent out , finally we can obtain the dried finished material.
Rotary dryer can handle sand, concentrate and fine powder products, it includes the following materials: sand, kaolin, slag, limestone, dry mortar, coal, iron ore, copper, and so on.
1. The rotary dryer produced by FTM compared to the traditional single-cylinder dryer can save lots of coal for clients, can directly help clients save the cost.
2. Rotary dryer equipped with dust removal system, and the length of the machine shorter than other dryers, it also has smaller area and less pollution.
If we want to improve the capacity of dryer and the quality of material, we must equipmented with a set of good dust removal and ventilation system. And add the materials to dryer, we also should be continuous, uniform, and the temperature should be adjusted to ensure stability. If you want to know the more information about rotary dryer, price and the knowledge of operation and maintainence, welcome to inquiry at any time.
This is our working site of our mining machine: high effcient, energy conservation, environmental protection, lower investment and higher profit
Our customer service team is here to help you 24/7. We can ship you parts, send field service technicians to your site and answer any questions you have. Whatever you need, we are here for you.
Contact Support
Shell diameter × shell Length
Inside diameter of outer shell
（mm）Inside diameter of inner shell
（mm）Shell Length
（m）Shell cubage
（m³）Shell obliquity
Lifting blade form
Highest inlet air temperature
（℃）Dimensions
（m）
Φ1.5×15m
1500
500
15
20.27
3-5%
Lifting form
850
16.2×2.7×2.7
Φ1.5×17m
17
22.97
18.2×2.7×2.7
Φ1.5×19m
19
25.68
20.0×2.9×2.9
Φ1.8×21m
1800
650
21
35.91
3-5%
Lifting form
850
22.5×2.7×2.7
Φ1.8×23m
23
39.33
24.5×2.9×2.9
Φ1.8×25m
25
42.75
26.5×2.9×2.9
Φ2.2×21m
2200
800
21
58.10
3-5%
Lifting form
850
----
Φ2.2×23m
23
63.61
Φ2.2×25m
25
69.15
NOTE: You can also send a message to us by this email market@sinoftm.com, we will reply to you within 24 hours. Now tell us your needs, there will be more favorable prices!
